Marine Vibration Pads in Saltburn - Marine Noise Control

Marine Vibration Pads are specialized pads designed to reduce vibrations and noise in marine environments. They are commonly used on ships and offshore structures to enhance comfort and protect equipment. These pads are made from durable, high-performance materials resistant to harsh marine conditions.

Size: Typically available in standard dimensions such as 300mm x 300mm, 400mm x 400mm, or customizable as per requirements.

Grade: High-performance elastomeric compounds, often rated for marine environments (e.g., ISO 10846 compliant).

Viscosity: Dynamic damping properties with loss factor (tan δ) ranging from 0.1 to 0.3 for optimal vibration absorption.

Buoyancy: Neutral or positive buoyancy, with specific gravity between 0.9 and 1.2 depending on material composition.

Material: Nitrile rubber (NBR), neoprene, or silicone-based elastomers, resistant to saltwater, oil, and UV degradation.

Load Capacity: Rated for static loads up to 50 MPa and dynamic loads up to 20 MPa, depending on thickness (10mm–50mm).

Temperature Range: Operational range from -30°C to +80°C, with some variants extending to -50°C/+120°C.

Fire Resistance: Often compliant with SOLAS/IMO FTP Code for low flame spread and smoke toxicity.

Compression Set: ≤10% after 24 hours at 25% deflection (per ASTM D395).

Frequency Range: Effective vibration isolation across 5Hz–200Hz, with resonance frequencies tailored to marine machinery.

Marine Vibration Pads and Marine Noise Control products typically comply with maritime standards such as ISO 6954 (Mechanical vibration and shock on ships), IMO MSC.337(91) (Noise levels on board ships), and SOLAS (Safety of Life at Sea) regulations. For specific compliance, refer to the manufacturer's documentation or certification.